performance features for BD281:
☆ white daub shape,it's gray after mixing,with strong initial viscous force
☆ It's consist of modified heat resistant toughening resin and special curing agent
☆ High temperature resistant,medium resistant,good toughness,aging resistant(can reach more than 8 years)
☆ Can cure at room temperature,can also heat for curing
☆ The highest temperature resistant is 280℃,when it is used as structural bonding,the highest working temperature is 250℃
☆ white daub shape,it's gray after mixing,with strong initial viscous force
☆ It's consist of modified heat resistant toughening resin and special curing agent
☆ High temperature resistant,medium resistant,good toughness,aging resistant(can reach more than 8 years)
☆ Can cure at room temperature,can also heat for curing
☆ The highest temperature resistant is 280℃,when it is used as structural bonding,the highest working temperature is 250℃
product usage:
With high bonding strength and good toughness, suitable for the bonding of metal,ceramic,cement,glass. Used in the bonding of wear resistant ceramic chip under 250℃ working condition,also suitable for the bonding and repairing of machine part under high temperature working condition.
How to use:
1. Surface treatment:Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,finally clean it by cleaning agent.
2. Configure adhesive:According to the specified ratio(the mass ratio:A:B=4:1),make A and B two component mix uniformly.
3. Using adhesive:Make the configured adhesive be coating on the adherend surface uniformly.
4. Curing:Full curing for 24 hours at room temperature(25℃) or full curing is based on room temperature curing for 4 hours,then heat it up to the temperature of 100℃ and keep this temperature for 4 hours.
1. Surface treatment:Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,finally clean it by cleaning agent.
2. Configure adhesive:According to the specified ratio(the mass ratio:A:B=4:1),make A and B two component mix uniformly.
3. Using adhesive:Make the configured adhesive be coating on the adherend surface uniformly.
4. Curing:Full curing for 24 hours at room temperature(25℃) or full curing is based on room temperature curing for 4 hours,then heat it up to the temperature of 100℃ and keep this temperature for 4 hours.
Product from company web link: wear resistant ceramic adhesives
No comments:
Post a Comment